Posted in Cycle

A bicycle cassette is the cluster of sprockets located on the rear hub of your bike, slotting onto a freehub body and held firmly in place with a threaded cassette lockring. Find out everything you need to know in our Cassette Buying Guide. 

What is a bicycle cassette?

A bicycle cassette is the cluster of sprockets located on the rear hub of your bike, slotting onto a freehub body and held firmly in place with a threaded cassette lockring. A typical cassette can have anything between five and 13 sprockets, although most modern bicycle drivetrains use either 9, 10 or 11.

What do cassettes do?

Cassettes provide a range of gearing options for your chain to run on. The range of gear ratios allows you to vary your pedalling cadence (revolutions per minute) to achieve optimum efficiency.

Running your chain on one of the larger sprockets - those with more teeth - will provide an 'easier' gear. This reduces the torque required to turn the back wheel - perfect for climbing hills - but it also means you have to complete more pedal revolutions to cover the same amount of ground.

Running your chain on a sprocket with a lower number of teeth maximises the torque, meaning less frequent but harder pedalling is required. This will allow you to keep adding power through your drivetrain without 'spinning out' (pedalling at an uncomfortably high number of revolutions) on a downhill section or sprint.

A good range of gears on your cassette, therefore, allows you to select the optimal level of torque versus pedal speed to transmit your total effort to the wheels in the most effective way.

bike cassette, bike sprocket, bike cog

How do you choose the right cassette for your bike?

The choice of cassettes can appear overwhelming at first glance. There are different combinations of sprockets to suit different tastes, terrains, and disciplines. For example, there is a significant difference in cassettes for triathlon bikes compared to those for mountain bikes.

The main thing to consider is the spread of gears on the cassette. The smaller the difference between the highest and lowest number of teeth, the smaller the jump between gears; facilitating a smoother gear change. However, having closer-geared sprockets will normally decrease the size of the largest sprocket on the cassette, leaving you with a gear ratio that may be less suited to climbing and tough terrain.

Road bike cassettes

bike cassette, bike sprocket, bike cogThe largest sprocket on a road bike cassette is generally smaller than those on mountain bikes, providing smaller jumps between gears. Most road bike cassettes have an 11, 12, or 13-tooth smallest sprocket, then between 21 and 32 teeth on the largest sprocket.

The vast majority of road bikes come with a 12-25 cassette, which is suitable for most cycling terrain when paired with a compact or standard chainset.

If you ride a lot of hills or struggle with hill climbing, a cassette with a lower ratio largest sprocket (27 or more teeth) may be beneficial. It will allow you to keep spinning for longer, rather than grinding.

When selecting a cassette for your road bike, ensure your derailleur can accommodate the largest sprocket. A longer cage rear derailleur is needed for larger sprockets because more chain is required to go around the greater number of teeth. Use a small cage derailleur with a large sprocket cassette and you'll risk over-stretching the derailleur. You may also see the chain becomes slack when riding in the smaller sprockets on the cassette.

For hill climbing and mountainous terrain, we recommend a road cassette such as the 11-28T SRAM Red 22 XG1190 11 Speed Cassette (A2), or the 11-34T Shimano Ultegra R8000 11 Speed Cassette.

For flatter terrain and time trialling, we recommend a road cassette such as the 11-25T SRAM Red 22 XG1190 11 Speed Cassette (A2) or the 11-28T Shimano Ultegra R8000 11 Speed Cassette.

Mountain bike cassettes

bike cassette, bike sprocket, bike cog

Mountain bike cassettes have a larger range of sprocket sizes due to the wide variety of gradients encountered on an off-road trail. Riding a flat forest track and then hitting a steep technical climb requires a major jump in gears. To accommodate this, the sprocket sizes on mountain bike cassettes require bigger gaps, which means sacrificing some of the smooth, tight shifting enjoyed by road versions. 

The creation of 11, 12, and now even 13-speed cassettes was a significant development for mountain biking. The larger number of sprockets means the biggest gear can have a huge number of teeth - providing easier gears for impossible climbs - while reducing the scale of the jump between each gear. This evolution allowed mountain bikers to do away with their triple chainsets, including the small get-out-of-jail chainring, often derided as "the granny ring". Instead, mountain bikers can run double or even single chainsets, reducing weight, clutter, and the frequency of mechanical problems.

Now, 10-speed mountain bike cassettes come in sprocket ranges such as 11-32, 11-34,11-36 and 11-42. Wiggle's best selling 10-speed mountain bike cassette is the Shimano Deore XT M771 10 Speed Cassette.

Meanwhile, 11-speed mountain bike cassettes come in even larger sprocket ranges, providing an even greater gear ratio choice, such as 11-40, 10-42 and even 11-46. Wiggle's best-selling 11-speed mountain bike cassette is the Shimano Deore XT M8000 Cassette (11-42).

12-speed drivetrains are also available for MTBs. Ratios range from 10-50 to 11-50. You may need to change your freehub before moving to 12 speed.

Shop mountain bike cassettes at Wiggle

Compatibility between different drivetrains

In some cases, it is possible to run a cassette from a different brand than the rest of your drivetrain.

SRAM and Shimano cassettes, on either road or mountain bike, are interchangeable with each other as the spacing is the same between the sprockets.

However, Campagnolo road cassettes will only work with Campagnolo drivetrains.

How do I fit my new cassette?

Once you've found the perfect cassette for your bike, you'll be glad to know the process for fitting it is relatively simple. 

You'll need a chain whip, a Shimano or Campagnolo specific removal tool (remember Shimano and SRAM are cross-compatible), an adjustable spanner, and maybe some gloves. 

After you've removed your rear wheel, brace the cassette using the chain whip, attach the removal tool, and remove the lockring with the adjustable spanner. Slide off the old cassette and replace, then reattach the lockring using the chain whip and spanner. 

Shop Tools and Maintenance at Wiggle

This video from Pro-Lite shows just how easy it is.